From the plan. Into production.

Crane systems, conveyor routes, and coordinated installations. See the work and the part IMH played in bringing it together.

22 projects
The 40-ton bridge crane spans the building bay above the installation equipment.
Crane Systems

40 Ton Bridge Crane — 80 ft Span

Installation of a 40-ton double-girder bridge crane with an 80-foot span. Explore the bridge placement, hoist details, and views from inside the installation bay.

Front view of the dual-rail conveyor and yellow support columns in the powder-coating installation area.
Conveyor & Finishing Systems

Dual-Rail Conveyor for Powder Coating

A hand-push conveyor built and installed for powder coating, with loadbars supported on two rails to make room for more carriers within each process.

Rigid-lifeline systems installed across several production areas in the fabrication facility.
Fall Protection

Rigid-Lifeline Fall Protection Installation

Installation of multiple rigid-lifeline systems in a new fabrication facility, serving elevated work on large assemblies and containerized units.

The replacement 38.5-ton bridge crane above the installation bay, with access equipment below.
Crane Systems

38.5-Ton Overhead Crane Replacement

A 38.5-ton crane replacement installed in a bay with limited headroom. The upgrade brought together new runways, support steel, bridge crane, and hoists.

Electric monorail carrier and suspended container beneath the green supporting frame.
Monorail Systems

Electric Monorail System Installation

An electric monorail installation documented with views of the carrier, supporting frame, and local controls, plus a short recording of the system in trial operation.

In place: the yellow 10-ton bridge crane spans the Michigan facility’s installation bay.
Crane Systems

10-Ton Crane Installation in Detroit, Michigan

From the delivery trailer to its place above the bay. Three field photographs document IMH’s installation of a 10-ton bridge crane in Detroit, Michigan.

The completed conveyor support structure and finishing enclosure at Martinrea.
Conveyor & Finishing Systems

Martinrea: Conveyor & Finishing Integration

Design, fabrication, and installation of Martinrea’s hand-push finishing conveyor, with rotating loadbars, protective shields, and switches serving two paint-booth lanes.

Two new 10-ton bridge cranes in the foreground with replacement 15-ton cranes visible farther into the Lejeune facility
Crane Systems

Four Cranes. One Coordinated Replacement.

Removal and replacement of two 15-ton double-girder and two 10-ton single-girder bridge cranes, with field modifications and electrical integration.

Red power-and-free conveyor curves, overhead cable trays, and long panel load bars.
Overhead Conveyor

Power & Free. Installed for the Project Team.

Installation of a supplied power-and-free conveyor, with field layout coordination and overhead equipment integration in a finishing area.

Completed booth interior with illuminated ceiling and wall panels and a clear central floor.
Finishing Systems

Dual Spray Booth & Mix Room Installation

Installation of two industrial spray booths and supporting mix rooms as one coordinated finishing area.

Wide view of blue overhead conveyor routing and yellow support columns beside finishing equipment during installation.
Overhead Conveyor

Enclosed-Track Conveyor & RTT Paint System

Design, fabrication, and installation of an enclosed-track conveyor integrated with an RTT paint system, including custom loadbars, support steel, and controls.

Wide production bay with overhead monorail routing, support columns, and yellow guardrails.
Monorail Systems

Overhead Monorail Expansion

Expansion and modification of an existing overhead monorail system during a planned production shutdown.

Blue handling equipment and parallel rails within a metal booth, viewed down a sloped floor opening.
Integrated Systems

Spray Booth & Conveyor Integration

Industrial spray-booth installation coordinated with the surrounding overhead material-handling equipment.

Blue power-and-free conveyor track on white supporting steel at the Toledo installation.
Integrated Systems

Toledo Power & Free Assembly Lines

Design, fabrication, and installation of four power-and-free assembly lines in Toledo, Ohio, with supporting steel and an integrated finishing-equipment scope.

White power-and-free conveyor track and bolt-together supporting steel at the Gainesville project.
Overhead Conveyor

Gainesville Power & Free Finishing Line

A power-and-free paint conveyor in Gainesville, Georgia, designed, fabricated, and installed with bolt-together support steel and coordinated finishing equipment.

Blue conveyor routes with yellow fixtures carrying formed metal panels through a production area.
Conveyor Systems

Inverted Power & Free Conveyor

A completed legacy conveyor project in Aurora, Indiana. IMH designed, built, installed, and commissioned the inverted power-and-free system.

Industrial conveyor routes on blue support steel, with mesh guarding and adjacent robotic equipment.
Overhead Conveyor

Legacy Power & Free Conveyor System

A legacy power-and-free conveyor with blue support steel, orange carriers, and guarded routes across multiple elevations. Explore seven views from the project archive.

Explore the project scopes.

A better system
starts with a conversation.

A new line. A better lift. A demanding installation.
Bring us your goal. We’ll help define the next step.

Plan a project Or call (812) 363-1819