Why choose powder
Consider powder when a durable decorative or protective finish is needed on a bake-compatible substrate. Coating chemistry and pretreatment determine suitability for indoor, outdoor, chemical, or wear exposure.
Surface finishing / Powder coating booths
Durable finishes. Repeatable application.
Contain and collect powder overspray while applying the coating to prepared parts.
Discuss your finishing line
IMH FIELD PHOTOGRAPHY / MATERIAL HANDLING & INSTALLATION01 / APPLICATION
Which parts are best suited to powder?
Conventional electrostatic powder coating is especially suited to conductive metal parts that can tolerate the selected coating’s bake cycle and can be electrically grounded. Steel fabrications, aluminum components, and repeated production part families are common candidates.
02 / PROCESS & EQUIPMENT
Choose the process around the part.
Manual or automated
Manual guns accommodate varied geometry and touch-up. Automatic guns, reciprocators, or robots can suit repeated parts; difficult recesses may still need manual application.
Color change and recovery
Color mix, change frequency, overspray collection, and reclaim compatibility influence booth and recovery-system selection. Recovery should be evaluated against finish quality and contamination risk.
03 / DESIGN INPUTS
Define the line before selecting equipment.
Define substrate, coating chemistry, film thickness, exposure, colors and change frequency, part geometry, grounding, and production rate. Coordinate the booth with pretreatment, dry-off, cure, conveyor clearances, and operator access.
What needs closer review
Deep recesses can be difficult to coat electrostatically. Mask threads, electrical contact areas, and close-tolerance surfaces as required. Heat-sensitive assemblies and porous castings need additional review; castings can require outgassing preparation. Specialized low-temperature or nonmetal powder processes need their own validation.
A COORDINATED PROJECT
Connect the process to production.
Talk with IMH about your parts, finish requirements, equipment interfaces, conveyor route, support structure, and installation scope.
Start a project conversationExplore surface finishing systems.
Technical background: PPG: electrocoating · Despatch: powder cure · PowderX: booth processes. Equipment and coating requirements are confirmed during project development.